Moisture meters for concrete floors: pin, pinless, and the calcium-chloride test
In Florida, the slab is the project. Moisture rising through concrete is the leading cause of the blistering and peeling this site's diagnosis pages document, and 'the floor felt dry' is not a test result. This guide separates three kinds of measurement that are constantly confused — because only one of them produces a number a coating warranty is written against.
How product links work here today: Product links on this page pass through this site's own click counter. This site belongs to the eBay Partner Network: a link that leads to eBay can earn this site a commission if you buy through it, at no extra cost to you, and those links are labelled as affiliate links where they appear. Links to other sellers are ordinary links and earn nothing. Product order is editorial and is never sorted by commission.
Three measurements, three different jobs
Comparison of concrete moisture measurement methods, what each measures, and what each can decide
Method
What it actually measures
What it can decide
Pin meter
Surface electrical resistance between two pins — a relative, shallow reading
Almost nothing about a slab by itself; designed chiefly for wood and drywall. A high reading is a warning, a low reading is not a clearance.
Pinless concrete meter
Comparative moisture in roughly the top half-inch, scanned quickly over large areas
Where the wet pockets are, and where a quantitative test belongs. Screening, not verdict.
Calcium-chloride test (ASTM F1869)
Moisture vapor emission rate — pounds per 1,000 sq ft per 24 hours
A go/no-go comparison against the coating manufacturer's stated limit. Slow, cheap, numeric.
In-situ RH probes (ASTM F2170)
Relative humidity deep inside the slab
The other recognised verdict method — usually a contractor's tool, referenced here so a pro's report is readable.
The two verified products: one screener, one verdict
Wagner Meters C555 Handheld Concrete Moisture Meter Kit
Wagner Meters (manufacturer store) · sold by the merchant at its own site
Best for Screening a slab fast — finding the wet pockets and placing quantitative tests where they count.
$545.00 — Standard kit $545; NIST-traceable variant $665 — as shown 2026-11-07 (checked 2026-11-07)
Manufacturer facts(from the seller's product page, 2026-11-07)
A pinless, non-destructive concrete moisture meter for fast preliminary readings on smooth, firm concrete, used to pinpoint problem areas and place in-situ RH sensors (manufacturer description, ASTM F2659).
Measures moisture hotspots 0.5 inch into the slab; concrete range 0.1–6.9 (manufacturer)
Built-in ambient temperature, relative humidity and dew point sensors
Our guidance: A screening instrument, bought for speed: walk the slab, find the wet pockets, and decide where a quantitative test belongs. For a coating contractor or a serious DIYer doing several floors, that screening speed is the value — for a single garage, renting or borrowing the quantitative test usually wins.
Limitations — read before buying: The manufacturer is explicit that a surface meter like this must never be the sole factor in deciding a slab is dry enough — it reads the top half-inch only and gives comparative, not in-situ RH, results. At this price it is hard to justify for one floor.
Taylor Tools #625 Calcium Chloride Moisture Test Kit
Tools4Flooring (Taylor Tools retailer) · sold by the merchant at its own site
Best for The quantitative verdict a coating specification is written against, at the lowest price in this library.
$26.29 — Single kit price as shown 2026-11-07; standard practice is 3 kits for the first 1,000 sq ft (checked 2026-11-07)
Manufacturer facts(from the seller's product page, 2026-11-07)
A calcium-chloride test (ASTM F1869 method) that measures moisture vapor emission in pounds per 1,000 sq ft per 24 hours — the quantitative figure coating specifications are written against (seller/manufacturer description).
Pre-weighed anhydrous calcium chloride dish with sealed dome and pH test kit included
Price includes the seller's/manufacturer's analysis service if the sample is mailed back
Requires a gram scale if you weigh it yourself
3 kits per first 1,000 sq ft, 1 per additional 1,000 sq ft (manufacturer method)
Our guidance: The cheapest honest go/no-go number in this entire library. A two-car garage needs three kits and patience, and the result is a figure you can hold against the coating manufacturer's stated limit instead of a feeling about whether the slab 'seems dry'.
Limitations — read before buying: It is slow by design — the dish sits sealed for the test period and conditions in the garage during the test affect the result. It measures vapor emission at the surface, not the slab's internal RH, and a passing result on a cool dry week does not guarantee the same slab passes in August.
See it at Tools4FlooringAffiliate link — this site may earn a commission through the eBay Partner Network if you buy through it, at no extra cost to you.
The honest buying order for one garage
For a single two-car floor, the calcium-chloride kits come first — three of them, patience, and a number. A pinless meter earns its price when there are several floors, a contractor workflow, or a dispute to document; for one floor it is a professional instrument bought to avoid a test that costs a fraction as much. Either way, a plastic-sheet tape test and a dry feeling are not measurements, and coating over them is the gamble the problems pages are full of.
Related products in this library
Quick Patch Concrete Repair, 1 gal kit (Grey) — $139.95 (checked 2026-11-07) See it at the sellerOrdinary seller link — no commission is earned on this link today.