Treasure Coast Home Cost ResearchIndependent local home-improvement research · Vero Beach, FL

Tools & products · editorial research

What you need before applying epoxy: the complete pre-coating checklist

A coating day is lost in the week before it, not on the day. This checklist is the order of operations this whole library hangs off: test the slab, prep the surface, patch what prep exposed, and only then open a can. Every item names the decision, not just the object — so the list still works if you buy nothing from it.

How product links work here today: Product links on this page pass through this site's own click counter. This site belongs to the eBay Partner Network: a link that leads to eBay can earn this site a commission if you buy through it, at no extra cost to you, and those links are labelled as affiliate links where they appear. Links to other sellers are ordinary links and earn nothing. Product order is editorial and is never sorted by commission.

The checklist, in order

  1. Moisture answer first. Screen the slab, and if anything is borderline, run a quantitative test and compare the number to your coating's stated limit. No answer, no coating. (Guide: moisture meters and tests.)
  2. Profile, don't etch. Mechanical prep matched to your machine and floor. (Guide: prep tools.)
  3. Patch after prep, not before. Grinding exposes spalls and pitting you could not see under the grime. Patch, let it cure as directed, and grind patches flush.
  4. Dust control is part of the job, not an accessory. Capture at the tool where you can; respiratory protection always. (Guide: dust control.)
  5. Application kit sized to the garage. Squeegee logic, shed-resistant covers, spiked shoes, spare consumables. (Guide: application tools.)
  6. The coating system itself — base and topcoat as one decision. A base chosen without its topcoat is how a floor ends up ambering in the sun strip by the door.

The system this checklist prices out

EP-E200 100% Solids Epoxy, 3 gal kit (Medium Grey)

Epoxy Plus LLC · sold by the merchant at its own site

Best for The base of the system: a 100% solids epoxy that can stand alone or take broadcast flake.

$249.95 — Single kit price as shown 2026-11-07 (checked 2026-11-07)

Manufacturer facts (from the seller's product page, 2026-11-07)

A 100% solids, two-component epoxy sold as a 3-gallon kit covering a stated 300–450 sq ft, usable as a stand-alone coating or as a base for broadcast decorative flake (manufacturer description).

  • 100% solids epoxy (manufacturer)
  • 3 gal kit, stated coverage 300–450 sq ft
  • Seven solid colours listed by the manufacturer
  • High-gloss finish; manufacturer describes resistance to chemicals, stains and abrasion

Our guidance: The coating line this guide's DIY math is built around: a true 100% solids product behaves nothing like a thin water-based big-box kit, so budget it as the system, not as paint. Pick the colour kit that matches the finish you want under a clear or pigmented topcoat.

Limitations — read before buying: Coverage is the manufacturer's stated range — rough or porous concrete uses more. 100% solids material has a short working window once mixed, especially in Florida heat; it is unforgiving of poor prep, and no coating fixes a slab that fails a moisture test.

See it at Epoxy Plus LLC Ordinary seller link — no commission is earned on this link today.

Polyaspartic Gloss 85 Topcoat, 3 gal kit

Epoxy Plus LLC · sold by the merchant at its own site

Best for The topcoat for sun-exposed garages, and the fast-cure option when the garage cannot be out of service for days.

$371.95 — Clear $371.95; colours $431.95 — as shown 2026-11-07 (checked 2026-11-07)

Manufacturer facts (from the seller's product page, 2026-11-07)

A two-component aliphatic polyaspartic topcoat the manufacturer describes as applicable in a single coat up to 30 mils, with a stated cure time of four to six hours and return to service in about 24 hours.

  • 3 gal kit, stated coverage 600–1,200 sq ft
  • Clear or pigmented; manufacturer describes it as non-yellowing
  • Can be squeegeed, back-rolled, or both (manufacturer)
  • Also usable with metallic pigments or broadcast flake (manufacturer)

Our guidance: The topcoat choice for garages that see direct sun through an open door — epoxy alone ambers, a polyaspartic topcoat is the standard fix in this guide's epoxy-vs-polyaspartic comparison. Its speed is the point and the risk: plan the whole application before you mix.

Limitations — read before buying: A four-to-six-hour cure cuts both ways — in Treasure Coast heat the working time is short and a first-timer can lose a section. It is a topcoat/system component, not a shortcut around grinding, moisture testing, or a base coat where one is required.

See it at Epoxy Plus LLC Ordinary seller link — no commission is earned on this link today.

Quick Patch Concrete Repair, 1 gal kit (Grey)

Epoxy Plus LLC · sold by the merchant at its own site

Best for Patching cracks, spalls and small holes after prep and before coating.

$139.95 — Single kit price as shown 2026-11-07 (checked 2026-11-07)

Manufacturer facts (from the seller's product page, 2026-11-07)

A two-component modified epoxy for patching concrete cracks, spalled areas and small holes under 1 inch, after surface preparation (manufacturer description).

  • 1 gal kit, grey
  • For cracks, spalls and holes under 1 inch (manufacturer)
  • Manufacturer states it can accept epoxy coatings before it has fully dried, curing with the coating on top
  • Manufacturer directs larger repairs and holes to its 100% solids epoxy instead

Our guidance: The step between 'fill the hairlines with sealant' and 'this floor needs a contractor': spalls and pitted areas that would telegraph through a coating get patched and ground flush with a material like this before any coating goes down.

Limitations — read before buying: Not a structural repair and not for moving cracks, settlement, or holes at or over 1 inch — the manufacturer itself points those elsewhere. Patching over an unprepared or damp surface wastes the material; prep first, patch second.

See it at Epoxy Plus LLC Ordinary seller link — no commission is earned on this link today.

What this checklist refuses to include

No acid-etch kit as a substitute for grinding, no 'one-day' promise, and no sealer sold as a coating. If a product's job is to make an unprepared or untested floor look coated, it does not belong on a checklist whose entire point is sequence.

Costs for the whole DIY-vs-pro decision, including what the documented $1,048 DIY job did and did not include, live on DIY vs pro and the cost guide.

Get a free estimate